- EL Products[10]
- Lamp Holders & Lamp Bases[10]
- Other Lighting Accessories[2]
- LED Bulbs & Tubes[4]
- LED Lamps[10]
3528 strip
1 Small size and exquisite;
2 High brightness;
3 High color rendering index;
4 Energy-saving and high efficiency;
3528 strip Characteristics:
High brightness,low optical attenuation
Low power consumption, long life
Thermal discharge faster, compact structure
High reliability
Application:
Residential lighting, outdoors lighting, etc
Limit Parameters(TA=25°C):
Parameters | MIN | MAX | Unit |
Positive Current IF | / | 30 | mA |
Positive Pulse Current IFP* | / | 80 | mA |
Reverse Voltage VR | / | 5 | V |
Working Temperature TOPR | -10 | +85 | °C |
Storage Temperature TSTG | -40 | +85 | °C |
Maximum Power Consumption PD | / | 100 | mW |
Note: Pulse width is 0.1 ms. Duty Ratio is 1/10
The Photoelectricity Parameter(TA=25°C):
Parameter Name | Conditions | Unit | MIN | TYP | MAX | |
Forward Voltage VF | IF=20mA | V | 2.9 | 3.2 | 3.6 | |
Reverse Current IR | VR=5V | μA | 0 | 0 | 10 | |
Chromaticity Coordinates | X | IF=20mA |
| - | 0.333 | - |
Y | - | 0.333 | - | |||
Luminous Flux φ | IF=20mA | lm | 4 | 6.5 | 7.5 |
Shape Dimension:
Characteristic Curve:
Cautions:
Static Electricity:
You need to take the protective measures for the product being sensitive to static electricity. It can lead to product damage or even the total invalid When the high voltage current made by static electricity is beyond the maximum rating. The ground resistance can’t beyond 10Ω
By using anti-static-electricity bracelets/ cushions/ overalls/ shoes/gloves and anti-static-electricity containers, it can effectively prevent static electricity and surge.The soldering iron point should be properly grounded.
soldering:
Use soldering by hand:
Recommend using soldering iron which power is less than 20W and temperature is not higher than 300 °C. Soldering time is not more than three seconds each time.
Reflow soldering:
(a)Recommend setting according to the temperature curve of the right picture.
(b)After the soldering, the product temperature will drop to the room temperature, careful processing of products is necessary.
Cleaning:
After the soldering, the cleaning need to made according to the following conditions
cleaning agent:Isopropanol or industrial alcohol (>95 °).
Temperture limite: When the cleaning time is in the 30 seconds , the temperature can’t higher than 50°C , if it is in the 3 minutes, the temperature can’t higher than 30°C.
Ultrasonic cleaning: MAX 300W